Run Step-3.7-Flash on M4 Max

The LLMCheck index estimates Step-3.7-Flash at ~26 tok/s on an M4 Max at Q4_K_M, scaled from its community-measured M5 Max run with the published bandwidth model, not a measured run on this chip. It needs about 65 GB of unified memory. It is StepFun's 198B mixture-of-experts model (11B active), released under the Apache 2.0 licence.

Speed
estimated~26
tok/s
First Token
—
seconds
RAM Needed
65
GB minimum
Engine
—
estimate
Want to run Step-3.7-Flash faster — or step up to bigger models? Find your Mac →

The figure

This is an LLMCheck index estimate from its published two-term bandwidth model, not a measured run; the index labels it so everywhere it appears. The bandwidth formula’s typical error for large MoEs is ±34% (mostly below the measured figure), against 70 measured runs of 18 models (how it is computed). Own this Mac? Submit a real run →

MetricValue
Tokens per secondestimated~26 tok/s
Provenanceestimate · how estimates are made
QuantizationQ4_K_M
Minimum RAM65 GB
Parameters198B MoE (11B active)
Chip bandwidth546 GB/s

Every figure for Step-3.7-Flash on the M4 Max

Each row as the index holds it, with its source. “Mac RAM” is the memory of the Mac a run used, not the model’s requirement (65 GB). The headline figure follows the reference rule: the lower-median measured plain-decode run at 5 bits or fewer (a run whose quant was not stated counts only when no stated-quant run qualifies), else the estimate; a run marked “not used to anchor estimates” is listed here but never becomes the headline.

SpeedQuantEngineMac RAMContextSourceNote
sourced51.2 tok/sQ4_K_Sllama.cpp128 GBTG128 from an empty prompthuggingface.coStepFun's GGUF card, Mac Studio M4 Max 128 GB: llama-batched-bench on the stepfun-ai/llama.cpp step3.7 branch, before upstream support (b9473, 2 Jun), so it does not anchor; 112 GB. 48.51 tok/s at 2K, 39.72 at 32K.; not used to anchor estimates
sourced49.58 tok/sIQ4_XSllama.cpp128 GBTG128 from an empty prompthuggingface.coStepFun's GGUF card, Mac Studio M4 Max 128 GB: llama-batched-bench on the stepfun-ai/llama.cpp step3.7 branch, before upstream support (b9473, 2 Jun), so it does not anchor; 105 GB. 47.78 tok/s at 2K, 38.93 at 32K.; not used to anchor estimates
Provenance key
sourced
Published figure — vendor or press review
estimated
community
Linked individual run — blog, forum or submission

Speed by context depth: Step-3.7-Flash on the M4 Max

Measured figures only, each from its source’s own session; the index does not estimate long-context or prefill speed, so a missing cell is —. Each @ column is plain decode with that many tokens already in the prompt, from the same session as the row’s short-context figure: decode slows as the KV cache it reads grows. Prefill is prompt processing, the tokens per second a runtime reads a prompt at; with long agent contexts it sets how long you wait before the first token.

RunDecode (row)@8K@16K@32K@64K@128KPrefill
llama.cpp · Q4_K_S · 128 GB Mac · huggingface.cosourced51.2 tok/s
TG128 from an empty prompt
sourced46.43 tok/ssourced43.77 tok/ssourced39.72 tok/ssourced32.74 tok/ssourced22.23 tok/ssourced404 tok/s
at 8K
llama.cpp · IQ4_XS · 128 GB Mac · huggingface.cosourced49.58 tok/s
TG128 from an empty prompt
sourced45.66 tok/ssourced43.29 tok/ssourced38.93 tok/ssourced32.44 tok/ssourced22.1 tok/ssourced411 tok/s
at 8K

Setup: run Step-3.7-Flash on a Mac

Ollama — the index has not verified an Ollama tag for Step-3.7-Flash, so it doesn’t print one (a guessed tag fails with “pull model manifest: file does not exist”). Search the Ollama library →

MLX — pick a build from Hugging Face’s MLX listings, then run it with its repo id:

pip install -U mlx-lm
mlx_lm.generate --model <repo-id> --prompt "Hello"

Downloads: Hugging Face repo → · Hugging Face model card →

Prefer a GUI? LM Studio downloads GGUF and MLX builds in one click. Step by step: install Ollama on a Mac.

Step-3.7-Flash on other Apple Silicon chips

ChipSpeedQuantEngineBandwidth
M5 Ultracommunity69 tok/s4-bitMLX1228 GB/s
M3 Ultracommunity57 tok/s4-bitMLX819 GB/s
M5 Maxcommunity48 tok/soQ2eMLX614 GB/s

About Step-3.7-Flash

StepFun's Apache 2.0 198B MoE (11B active, 23 May 2026), image input, 256K context; it supersedes Step-3.5-Flash. Card: SWE-Bench Pro 56.3 (vendor scaffold), Terminal-Bench 2.1 59.5. The oQ2e MLX build is 63 GB and IQ4_XS ~105 GB, so it needs 96–128 GB; upstream llama.cpp has run it since b9473, and community oMLX runs measured ~48–51 tok/s on an M5 Max at 2–3 bits.

Apache 2.0 licence · 198B MoE · 256K context · LLMCheck capability 41/50 · see its leaderboard rank →

Memory by context length

Estimated, not measured: the index’s minimum for Step-3.7-Flash (65 GB — the weights at the quant that fits, plus ~2 GB) plus the KV cache for that many tokens, computed from its config.json. 12 full layers + 33 sliding-window layers (window 512). A 16-bit KV cache is the default in llama.cpp, Ollama, LM Studio and mlx-lm; a q8 cache halves the KV part. Coding agents hold 64K tokens or more. Runtimes also add a buffer that grows with context, so leave a few GB spare. macOS lets the GPU use only part of a Mac’s memory by default (figures for an M4 Max Mac on macOS 15, the lower default; macOS 26 allows more): “fits” means within the GPU memory a Mac of that tier can use with the limit raised, a tier tagged raise GPU limit fits only after sudo sysctl iogpu.wired_limit_mb raises it (the tooltip has the exact command), and the last column is the smallest Mac memory size whose default limit holds it (the GPU memory limit).

ContextKV cache (16-bit)RAM neededRAM, q8 KVSmallest tier that fitsWithin the default GPU limit
8K~0.5 GB~65.2 GB~65.1 GB128 GB Mac96 GB Mac
32K~1.7 GB~66.4 GB~65.7 GB128 GB Mac96 GB Mac
64K (coding-agent context)~3.3 GB~68.0 GB~66.5 GB128 GB Mac96 GB Mac
128K~6.5 GB~71.2 GB~68.1 GB128 GB Mac96 GB Mac

System requirements

Macs with the M4 Max

🛒 Get a Mac that runs Step-3.7-Flash

Step-3.7-Flash needs about 65 GB of unified memory. These Apple Silicon Macs have enough to run it. Apple builds the higher-memory configurations to order; Amazon does not stock them, so the used option links Amazon Renewed listings.

As an Amazon Associate, LLMCheck earns from qualifying purchases. These affiliate links cost you nothing extra and help keep the LLMCheck index free.

Compare More Models

See how Step-3.7-Flash stacks up against other models on your specific Mac hardware.

Open Compare Tool Full Leaderboard